Balancing valves ASV-PV, MSV-S, USV-I, etc.

Automatic balancing valves ASV are used to maintain a constant pressure difference between the supply and return pipelines of regulated systems, heat and cold supply at variable flow rates of the medium passing through them in the range from 0 to 100%. Regulation is carried out by a valve installed on the return pipeline of the ASV-P series, which has a fixed setting of 10 kPa, or by valves with variable setting ASV-PV (5-25 kPa) and ASV-PV Plus (20-40 kPa). Shut-off valve ASV-M or ASV-I, with which you can limit the maximum flow rate of the moving medium.

• ASV. Technical description.
• ASV-PV, ASV-PV Plus. Technical description.

AB-PM is an automatic balancing valve, a pressure drop constancy regulator designed for hydraulic balancing of heating systems with variable flow rates of the coolant passing through it in the range of 0-100%.

• AB-PM. Technical description.

MSV-BD is a new generation of manual balancing valves designed to solve the problems of hydraulic balancing of heating systems, heat and cold supply of ventilation installations and hot water supply systems (DHW).

• MSV-BD. Technical description.

MSV-S are designed for joint use with manual balancing valves of the MSV series. MSV-S can also be used as high-quality shut-off valves in heat and cold supply systems of buildings.

• MSV-S. Technical description.
• Valve kits MSV-BD/MSV-S. Technical description.

The MSV-C valve is designed for hydraulic balancing of the pipeline network of heating, cooling and hot water systems (it is recommended to use valves made of corrosion-resistant brass in hot water systems).

• The MSV-C valve. Technical description.

MVT valves are a new generation of manual balancing valves designed for hydraulic balancing of heating, heat and cold supply systems, DHW. MVT combines the capabilities of a balancing valve and a ball valve,

• MVT, MVT/MSV-S valves. Technical description.

The USV-I combines the functions of a manually reconfigurable variable hydraulic resistance valve and a shut-off valve. USV-I limits the maximum flow of heat or coolant through the riser or installation. The valve is equipped with a measuring nipple and a drain valve.

• USV-I. Technical description.

Shut-off and balancing valves type SVL are designed for use in a heating system in order to disconnect the heating device from the pipeline network, as well as for balancing the system in the case of radiator temperature control valves without built-in balancing devices.

• Shut-off and balancing valves type SVL. Technical description.

MSV-F2 are designed for installation adjustment of pipeline systems of heat and cold supply of buildings and structures in order to ensure their calculated flow distribution. The valves allow you to change and fix their throughput, have a convenient adjustment indicator.

• MSV-F2. Technical description.

Combined balancing valves AB-QM - automatic balancing valves, flow stabilizers. Main applications: flow limitation and stabilization in systems with constant hydraulic characteristics, for example, in single-pipe risers of heating systems or in cooling systems of air conditioning installations.

• AB-QM. Technical description.

Direct-acting thermostatic elements QT are designed to regulate the temperature of the reverse coolant in single-pipe risers of water heating systems of buildings. It is used in conjunction with AB-QM valves.

• QT. Technical description.

The AQT and AQF valves with measuring nipples make it possible to control the pump performance proportionally. DN = 10-250 mm.

• Valves AQT, AQF. Technical description.

Automatic balancing valves of the APF series are pressure drop constancy regulators designed for hydraulic balancing of heat and cold supply pipeline systems. DN = 65-100 mm.

• Automatic balancing valves of the APF series. Technical description.

APT valves are used in conjunction with a partner valve. The APT valve is installed on the return pipeline of the system. The partner valve is installed on the supply pipeline of the system. Both valves are connected using a pulse tube. DN = 15-50 mm.

• APT valves. Technical description.

The CDT shut-off and measuring valve (DN 15-50) is used in conjunction with the automatic balancing valve ASV-P, APT to regulate the pressure difference in the two-pipe risers of the heating system, where the radiator valves have a device for preliminary (installation) adjustment of throughput.

• Shut-off and measuring valve CDT. Technical description.

MNF manual balancing valves (DN 15-400) are designed for installation adjustment of heat and cold supply systems for buildings and structures to ensure their calculated flow distribution. The valves allow you to change and fix their throughput, have a convenient adjustment indicator.

• MNF valves. Technical description.