Valve actuators AMV, AME, TWA, etc.

Electric gear drives with pulse control are designed to actuate saddle control valves in heating, ventilation, hot water supply and water heating systems. Some types of electric drives are equipped with a protection device (return spring), which allows you to close the control valve when the control system is de-energized.

Models: AMV 10, AMV 13, AMV 23, AMV 33, AMV 25, AMV 35, AMV 25SD, AMV 25SU, AMV 85, AMV 86, AMV 435, AMV 438SU, etc.

• AMV 10, 13, 23, 33. Technical description.
• AMV 25, 35. Technical description.
• AMV 25SD, 25SU. Technical description.
• AMV 85, 86. Technical description.
• AMV 435. Technical description.
• AMV 438SU. Technical description.
• Geared electric drives with three-position AMV control. General description.

Electric gear drives with analog control are designed to control control valves by analog signal 0(4)...20 mA from electronic regulators such as ECl or similar.

Models: AME 10, AME 13, AME 23, AME 33, AME 13SU, AME 23SU, AME 25, AME 35, AME 25SD, AME 25SU, AME 85, AME 86, AME 435, AME 438SU, etc.

• AME 10, 13, 23, 33. Technical description.
• AME 13SU, 23SU. Technical description.
• AME 25, 35. Technical description.
• AME 25SD, 25SU. Technical description.
• AME 85, 86. Technical description.
• AME 435. Technical description.
• AME 438SU. Technical description.
• Geared electric drives with analog control AME. General description.

The electric drives ARE 152-153 are designed to work with the control valves VM2 and VFM2 DN 15-50. The drives are controlled by an analog signal of type Y. There are variants of this electric drive with a protective function. The protection device (return spring) allows you to close the control valve when the system is de-energized.

The ARV 152-153 electric actuators are designed to control the VM2 and VFM2 control valves of 15-50 mm DN by a pulse signal from three-position electronic regulators of the ECl type or similar.

• ARE 152- ARE 153. Technical description.
• ARV 152- ARV 153. Technical description.

Electric actuators for rotary control valves AMB 162/182 are used to control 3- and 4-way rotary valves of the HRE, HFE and HRB type in district heating systems for regulating the temperature of the coolant.

• AMB 162, 182. Technical description.

Thermoelectric actuators are designed for two-position control of various control valves in heating systems and heat and cold supply of local ventilation installations. The actuator is equipped with a visual stroke indicator that shows whether the valve is in the closed or open position.

TWAS are designed for two-position control of various control valves in heating and cooling systems with fan coils, as well as in small local ventilation installations.

• TWA-A, TWA-K, TWA-D, TWA-V. Technical description.
• TWA-Z. Technical description.

TWA-LZ are used in conjunction with the control valves of the VZL series. The drive can be controlled using a room thermostat. This provides an effective cost-effective solution for regulating the supply of hot or cold water to fan coils, as well as to small ventilation installations.

• TWA-LZ. Technical description.

ABNM A5 with logarithmic/linear control characteristic for proportional valves. Specially designed for joint use with AB-QM valves in heating and cooling systems.

• ABNM A5. Technical description.

The ABV thermoelectric actuator is designed to control two-way valves of the RAV, VMA, VMT type and a three-way VMV valve mainly in heating and hot water supply systems.

• Thermoelectric drive ABV. Technical description.

The following control signals are applied to ICAD drives: 0-20 mA, 4-20 mA (default), 0-10 V, 2-10 V. In addition, the actuators can control the valves in two-position mode (ON/OFF) in accordance with discrete control signals.The valves can also be operated manually via a drive or a special magnetic tool.

• ICAD drives. Technical description.

The AMI 140 actuator is designed for two-position control of ABQM valves (DN = 10-32 mm) and VZ, VZL.

• Drive AMI 140. Technical description.